MCA Pro Comfort suspension Nissan R32 GTR

MCA now have the Pro series available, designed for various applications to best meet your needs!

MCA Pro Drag

Whilst Drag Racing is not a motorsport that MCA Suspension is well known for, we have actually had a lot of success with top-level teams running in the 6s. We decided to take this success and experience and use it to develop drag racing-specific products for a wider range of vehicles. This resulted in the MCA Suspension Pro Drag product.

Designed specifically for Drag Radials used on prepped track surfaces,
thanks to our latest Fusion V3.0 Valving, we’ve managed to design a
product versatile enough to also be used on unprepared surfaces as well
as Roll Racing events.

 

 

MCA Pro Stance

The MCA Pro Stance suspension range is designed for extremely low ride heights. With a unique internal valving design, the Pro Stance suspension is designed to run super stiff springs, and even sit on the bump stops at ride height without excessive bounce. We’ve tested our kits right down to only 10mm of compression travel.

With that said, at more practical ride heights, the ride quality and handling characteristics that this product features are actually quite remarkable and took us by surprise. This is mostly thanks to our latest Fusion 3.0 Valving, which has assisted us in producing a much more well-rounded setup than expected. This product is a great choice for customers wanting a low street car look, right through to those wanting a slammed show car.

 

 

MCA Pro Sport

The MCA Pro Sports are designed to provide a high level of performance and handling with an acceptable level of comfort on the road. The minimal compromise is achieved thanks to Fusion 3.0, MCA’s latest valving, along with a more thorough and dedicated development program. Their setup has been derived from circuit racing testing for the Red Series but modified to suit a wider range of applications including street use. They feature a very wide range of height adjustment as well as hard/soft damper adjustment and camber adjustment where applicable.

The Pro Sports are internally and externally assembled here in our Brisbane Workshop. This means we have full control over the quality and accuracy of our products and our customers also get freshly assembled suspension.

Suitable Applications:

• Street driving with a firm but adequate ride quality.
• Enjoyable spirited driving.
• High-level spirited driving.
• Light/Medium motorsport use.
• Factory height down to a tyre inside fender of ~15mm (estimate).

 

 

MCA Pro Comfort

The MCA Pro Comforts are designed to provide a high level of comfort (in some cases close to or better than OEM) but whilst also incorporating a very enjoyable level of handling for street applications with a good range of height adjustment.

The minimal compromise achieved is thanks to Fusion 3.0, MCA’s latest valving, along with a more thorough and dedicated development program. The Pro Comforts also feature hard/soft damper adjustment as well as camber adjustment where applicable.

The Pro Comforts are internally and externally assembled here in our Brisbane workshop. This means we have full control over the quality and accuracy of our products and our customers also get freshly assembled suspension.

Suitable Applications:

• Comfort focused street driving.
• Light spirited driving with improved handling over OEM.
• Ride height adjustment down to 10mm tyre to fender gap (can vary per vehicle).