Radium Remote Mount Fill Neck

Description Click Here to download installation instructions (PDF). The Radium Engineering fuel cell fill kits can be used on any cell that uses a 6-bolt 2.18" (55mm) bolt circle mounting flange. The 20-0147 Fuel Cell Remote Mount Fill Neck is multi-functional and is primarily used with a body-mounted remote filler, as shown in the picture below. The fill neck has a machined barb for 2-1/4" filler hose (available HERE ). The kit includes a check valve for role over protection. If circumstances ever change, ie: the fuel cell is moved to a different vehicle, 20-0148 Fill Neck Cap can screw onto 20-0147 Remote Fill Neck for direct filling. Note that even though the sealed roll-over valve can be removed for direct filling, the fill neck has a minor machining obstruction from the valve. Alternatively, the 20-0197 Direct Mount Fill Neck and Cap is perfect for direct into the fuel cell, as shown below. This kit uses the same 20-0147 Fill Neck Cap but the shorter fill neck is cleared of any obstruction (as shown below) so filling is quick and simple. The Direct Fill neck does NOT have a built-in check valve. Both fill necks are CNC machined from billet aluminum. The cap uses a Viton O-ring and is not vented. 20-0197 Includes: -Machined and Anodized Aluminum Fill Neck -Anodized and Laser Etched Aluminum Cap -Viton Gasket Flange Seal -Viton O-ring Cap Seal -Nylon Sealing Washers -Stainless Steel Hardware 20-0147 Includes: -Machined and Anodized Aluminum Fill Neck for 2-1/4" ID Hose -Viton Gasket Flange Seal -Viton Flapper Valve -Nylon Sealing Washers -Stainless Steel Hardware 20-0360 Includes: -Machined and Anodized Aluminum Blank Plate -Viton Gasket Flange Seal -Nylon Sealing Washers -Stainless Steel Hardware 20-0148 Includes: -Anodized and Laser Etched Aluminum Cap -Viton O-ring Cap Seal