Tomei Cam Cap Stud Kit - Suits Nissan RB20 / RB25 / RB26
SKU: 193016Description
When using the high lift profile camshafts for high RPM use the stress loads on the cam caps will be extreme and much higher than what the engineers had originally designed the stock studs for. These bolts are designed and made from Chrome Moly Alloy which will allow you to use with cam lift profiles of up to 12.0mm and for up to 10,000 RPM safely.
When using the high lift camshafts engine builders of the past had to depend on the stock bolts. Running the risk of the incorrect strength of the studs, nuts screw holes were always a worry. But now with these Tomei studs the extra strength will allow for pushing your engines performance to new levels for bigger power gains.
Product Information:
- Bolt x 28pce
- Nut x 28pce
Product Specifications:
- Material: Bolt/Nut SCM435
- Ladder FC Material (Special Heat Treated): M6 P1.00
Bolt Strech Limits
Bolts and screws in general will stretch when placed under stressful conditions. The stock bolts will tend not to return perfectly to its original shape once stretched due to the manufacturing methods used for the original purpose of the bolt design. Tuned engines will go through many procedures which require the bolts to be reused during every step. When having a dummy head installed and getting a bore and hone, when checking for bearing clearances and so on. So when the bolts are removed and torque up repeatedly bolt stretch management will then become difficult to manage the and retain the strict clearances required. The TOMEI Stud bolts are the best choice for high performance precision engines which require the fixed elastic range of the bolt set for repeated use and to maintain performance. The TOMEI Bolts will keep your engine together when needed most.
Rotating Surface Treatment
Rotation processing is the method of Rotating Die and Work Hardening the raw core of the bolt is placed on the cradle between the two rotating die with pressure applied from both sides. The metallic crystals within the bolts are then deformed at a microscopic scale, and then interacted with one another to make up a strengthened bolt that carries increased yield strength. The chromoly steel of the Tomei strengthened bolt is first heat treated and rolled on the rotating die, increasing impact resistance, surface strength, and longevity. These standards add up for the highest quality product available.
Angle Torque Bolt Tightening Method
An engine cannot be properly built without the use of the angle torque method when tightening certain bolts. It is necessary to utilize a special angle gauge when tightening strengthened studs and connecting rod bolts. Applying torque to the bolts without this specialized tool can lead to immediate or eventual catastrophic failure of the engine assembly.
Torque Numbers Cannot Be Trusted
Engine components that require precision accuracy when tightening its bolts cannot be trusted with basic torque figures. This is due to 80~90% of the friction is lost on the surface of the thread and the seat when tightened, with the correct figure being at 10~20% of the torque applied. The surface of the thread and the seat depends on the roughness of each surface and the lubrication state, so that no matter how accurate the torque specs are specified it cannot be trusted.
Please use an Angle Guage as well when torquing up these TOMEI Reinforced Bolts.
Vehicle Compatibility:
- Nissan RB Twin Cam Engines (RB20, RB25, RB26)
Make 4 payments of $62.50 over 8 weeks and get it now!